BQ25017RHLR
| Parameters | |
|---|---|
| Subcategory | Power Management Circuits |
| Technology | HYBRID |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BQ25017 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.8V |
| Power Supplies | 5V |
| Interface | USB |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 500mA |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 6.5V |
| Switcher Configuration | BUCK |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1MHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | PFM MODE IS ALSO AVAILABLE |
BQ25017RHLR Overview
It is included in the Tape & Reel (TR) package. There is a 20-VFQFN Exposed Pad package included with this item that you will need to take care of.A Surface Mount mounting type is assigned to the device.Setting the temperature to -40°C~125°C TA is the right thing to do.To operate the device, an analog IC called SWITCHING REGULATOR is used.To charge the device, you will need to supply it with Constant - Programmable of current.It is possible to find the related parts of this device by looking at its base part number BQ25017.It has 20 terminations.The battery pack has 4.2V.A total of 20 pins are present on it.To operate the product, it is necessary that 20 pins be inserted into the device.It should be able to run off of a 5V battery.As long as the supply voltage is 6.5V, it is capable of withstanding the voltage.In the case of 1.8V output voltage, there is a possibility of optimal efficiency.A device of this type will have its output current set to 500mA in this case.The device falls under the Power Management Circuits subcategory.This device can work at as low a voltage as possible, such as 4.35V.There is 2mA voltage set in Vsup (maximum supply voltage).Regarding the power supply for the part, it is set to 5V.There is a minimum input voltage of 4.5V volts.It operates at a switching frequency of 1MHz.As well as the additional features of PFM MODE IS ALSO AVAILABLE, this device can also be used to generate the same functionality.
BQ25017RHLR Features
Battery pack voltage of 4.2V
Power Management Circuits subcategory
Switching frequency of 1MHz
Addtional features of PFM MODE IS ALSO AVAILABLE
20-VFQFN Exposed Pad package
BQ25017RHLR Applications
There are a lot of Texas Instruments BQ25017RHLR Battery Chargers ICs applications.
- Locomotive
- Boat
- Floor scrubber
- Portable speaker systems
- Marine buoy lights
- PDAs
- High end, feature-rich consumer
- Portable devices
- Home routers
- Electronic dictionary
