BQ28Z610DRZR-R1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Surface Mount | YES |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 12 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Terminal Pitch | 0.4mm |
| JESD-30 Code | S-PDSO-N12 |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 26V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.2V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Adjustable Threshold | YES |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 2.5mm |
| RoHS Status | ROHS3 Compliant |
BQ28Z610DRZR-R1 Overview
This device uses an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT. It is possible to access 1 channels. All times this device should be set to 7.2V. Voltage supply (Vsup) is 26V at maximum. There must be a voltage higher than 2.2V (Vsup) on the supply. Keeping the operating temperature below 85°C is recommended. There should be a temperature above -40°C when working.
BQ28Z610DRZR-R1 Features
operate supply voltage at the range of 7.2V
Supply Voltage-Max (Vsup) : 26V
BQ28Z610DRZR-R1 Applications
There are a lot of Texas Instruments BQ28Z610DRZR-R1 Battery Management ICs applications.
- Rear light with dynamic control
- Non-road type vehicles
- PV timeshift
- Continually optimizing battery performance
- Monitoring the battery
- Power tools
- Scooters
- ADAS radar
- Head up display (HUD)
- Consumer electronics
