BQ294502DRVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~110°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10.8V |
| Base Part Number | BQ294502 |
| Function | Battery Protection |
| Output Voltage | 30V |
| Power Supplies | 3/15V |
| Number of Channels | 1 |
| Max Supply Voltage | 25V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 2μA |
| Adjustable Threshold | NO |
| Supply Current-Max (Isup) | 0.002mA |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 2 ~ 3 |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ294502DRVT Overview
A 6-WDFN Exposed Pad package would be appropriate for this. POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power IC employs. It is possible to access 1 channels. It has a total of 6 pins. There is a Tape & Reel (TR) case packaging. The minimum supply voltage for this electrical part should not be less than 3V volts. In this case, it's a Power Management Circuits family electronic part. Surface Mount is mounted in the way of this electronic component. 25V voltage greater than 25V volts should be supplied to this electronic battery. It can deliver the functions listed in Battery Protection. For the electric part to perform effectively, it should operate at a temperature around -40°C~110°C TA. This electronic part has a chemistry of Lithium-Ion. A 3/15V volt battery powers it. All times this battery protection IC should be set to 10.8V. This is a family based on BQ294502. Unless specified otherwise, Isup (the maximum supply current) must not exceed 0.002mA. With a supply voltage of 2μA volts, it runs.
BQ294502DRVT Features
Available in 6-WDFN Exposed Pad Package
with 6 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium-Ion
operate supply voltage at the range of 10.8V
Output Voltage at the range of 30V
BQ294502DRVT Applications
There are a lot of Texas Instruments BQ294502DRVT Battery Management ICs applications.
- Grid support
- Grid power infrastructure
- Motor bikes
- DC/DC converter
- Monitoring the battery
- Refrigerator
- Robots
- Ventilator
- Industrial AC/DC converter
- Utility vehicles
