BQ76PL536ATPAPTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 64-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ76PL536 |
| Function | Multi-Function Controller |
| Output Voltage | 5V |
| Power Supplies | 20V |
| Number of Channels | 1 |
| Interface | SPI |
| Max Supply Voltage | 27V |
| Min Supply Voltage | 7.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 22μA |
| Output Current | 22μA |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 15mA |
| Fault Protection | Over Temperature, Over/Under Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 3 ~ 6 |
| Number of Batteries | 6 |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ76PL536ATPAPTQ1 Overview
The 64-PowerTQFP package is suitable for battery instrument. This system battery uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. As of right 1w, there are 1 channels available. Total pins are 64. The smart tools battery is packaged in a Tape & Reel (TR) case. Voltage must not drop below 7.2V volts to operate this electrical part. The Power Management Circuits family of electrical components includes this component. This electronic component is mounted in the way of Surface Mount. Ensure that the power management IC's supply voltage does not exceed 27V volts. The Multi-Function Controller functions can be delivered by it. For the electronic part to perform properly, it should be operated at temperature -40°C~105°C TA. Chemistries for this electrical part are Lithium-Ion. A 20V volt supply powers it. All times this battery protection IC should be set to 20V. It uses the BQ76PL536 family as a base. Unless specified otherwise, Isup (the maximum supply current) must not exceed 15mA. The number Automotive, AEC-Q100 corresponds to the series of the battery protector ic. It is not possible to provide the power ICs with more current than 22μA. It operates on a supply current of 22μA volts.
BQ76PL536ATPAPTQ1 Features
Available in 64-PowerTQFP Package
with 64 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium-Ion
operate supply voltage at the range of 20V
Output Voltage at the range of 5V
BQ76PL536ATPAPTQ1 Applications
There are a lot of Texas Instruments BQ76PL536ATPAPTQ1 Battery Management ICs applications.
- Electric vehicles
- Motor drive - 3 phase AC400V inverter
- TFT cluster
- Solar and wind-generating plants
- Aviation ground support systems
- Front light
- Autonomous vehicles
- Motor drive - single phase AC100V-240V non -isolated
- LED lighting
- DC/DC converter
