BSC9132NSN7KNKB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 780-BFBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ Qonverge BSC |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 780 |
| ECCN Code | 3A991.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B780 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.97V |
| Speed | 1.333GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500 |
| Bit Size | 32 |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 2 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 (1) |
| Additional Interfaces | AIC, DUART, I2C, MMC/SD, SPI, USIM |
| Co-Processors/DSP | Signal Processing; SC3850 - Dual |
| Height Seated (Max) | 2.53mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
BSC9132NSN7KNKB Overview
Since the microprocessor is packed in 780-BFBGA, FCBGA, shipping overseas is convenient. Using advanced packaging techniques Tray, high reliability is ensured. Cores/Bus width of the CPU is 2 Core 32-Bit . Obtain a basic understanding of operating temperature around 0°C. The cpu microprocessor belongs to the QorIQ Qonverge BSC series. The CPU is powered by a PowerPC e500 core. The CPU uses DDR3, DDR3L RAM controllers. This microprocessor is equipped with an interface of AIC, DUART, I2C, MMC/SD, SPI, USIM. As far as I/O is concerned, this CPU runs at 1.8V 2.5V 3.3V. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Total terminations are 780. With a 1V voltage supply, the part should be turned on and run. 32-Bit is its architecture. Supply current is maximum at 1.05V. An external data bus width of 32 is available on this CPU.
BSC9132NSN7KNKB Features
PowerPC e500 Core
32-Bit Structure
BSC9132NSN7KNKB Applications
There are a lot of NXP USA Inc. BSC9132NSN7KNKB Microprocessor applications.
- Torpedo guidance
- Mice
- Entertainment products
- Electrocardiogram (EKG)
- Robotic prosthetic limbs
- ECG machine
- Smartphones-calling, video calling, texting, email
- Missile control
- Virtual reality VR robots
- Paper shredders
