BSP452HUMA1
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BSP452 |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 700mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 160m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 2.3mm |
BSP452HUMA1 Overview
A Tape & Reel (TR) is used to package it.In the TO-261-4, TO-261AA package, it is included.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.I believe it belongs to the BSP452 family.A total of 4 terminations can be found in it.Currently, the lighting driver has a total of 1 functions.This lighting driver is capable of delivering a maximum output of 700mA volts.High efficiency is possible at 13.5V supply voltage.There are 4 pins in total on this board.It is part of the miniPROFET? series.In this LED driver, the maximum supply voltage is configured to be 34V (Vsup).Normal operation requires Vsup above 5V.
BSP452HUMA1 Features
Supplied from 13.5V
BSP452HUMA1 Applications
There are a lot of Infineon Technologies BSP452HUMA1 Power Switches ICs applications.
- Portable/Handheld Devices
- Smartphone and PDA
- Notebook PC
- PC Cards
- USB3.1 Power Delivery
- HDD, SSD
- Notebook and Tablet Computers
- Wearable Devices
- PDAs
- Portable Devices
