banner_page

BSP742RNUMA1

N-Channel PMIC Automotive, AEC-Q100 Series 13.5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BSP742RNUMA1
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 127
  • Description: N-Channel PMIC Automotive, AEC-Q100 Series 13.5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish MATTE TIN
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 13.5V
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
JESD-30 Code R-PDSO-G8
Number of Outputs 1
Qualification Status Not Qualified
Output Type N-Channel
Supply Voltage-Max (Vsup) 34V
Supply Voltage-Min (Vsup) 5V
Interface On/Off
Current - Output (Max) 400mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5V~34V
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 250m Ω
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Length 5mm
Width 4mm
RoHS Status RoHS Compliant

BSP742RNUMA1 Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It contains 8 terminations.Currently, the lighting driver has a total of 1 functions.This LED driver has a maximum output of 400mAV.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.The LED driving board is equipped with a total of 8 pins.It is included in the Automotive, AEC-Q100 series.The Vsup value (maximum supply voltage) is set to 34V.Normal operation requires Vsup above 5V.

BSP742RNUMA1 Features


Supplied from 13.5V

BSP742RNUMA1 Applications


There are a lot of Infineon Technologies BSP742RNUMA1 Power Switches ICs applications.

  • Hot Swap
  • Storage (HDDs, SSDs)
  • Set-Top Boxes
  • Solid State Drivers
  • Wireless Headsets
  • PDAs
  • Telecom and Network Systems
  • PC Card Hot Swap
  • Low Voltage I/O System Power
  • Notebook PC

Write a review

Note: HTML is not translated!
    Bad           Good