BSP742TXUMA1
| Parameters | |
|---|---|
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BSP742 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 800mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 260m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1999 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
BSP742TXUMA1 Overview
The package is in the form of a Cut Tape (CT).It's included in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.There is a BSP742 family of things that it belongs to.It has a total of 8 terminations.The LED driving board has a total of 1 functions.From the lighting driver, there is a maximum output of 800mAV.High efficiency is possible at 13.5V supply voltage.8 pins are connected to it in total.It is included in the miniPROFET? series.The maximum supply voltage for this LED driver is 34V (Vsup).Normal operation requires a voltage above 5V for the supply voltage.
BSP742TXUMA1 Features
Supplied from 13.5V
BSP742TXUMA1 Applications
There are a lot of Infineon Technologies BSP742TXUMA1 Power Switches ICs applications.
- Hard Disk Drives
- Hot Swap
- PDAs
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Telecom and Network Systems
- Solid-State Drives
- Smart Phones, Feature Phones
- USB Ports/Hubs
- Storage (HDDs, SSDs)
