BSP752RXUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | BSP752 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 52V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 1.3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~52V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
BSP752RXUMA2 Overview
A Tape & Reel (TR) is used to package it.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.I believe it belongs to the BSP752 family.A total of 8 terminations have been recorded.The LED driver has 1 functions.This LED driver has a maximum output of 1.3AV.As long as the supply voltage is 13.5V, high efficiency can be achieved.8 pins are equipped with it.This electrical component is part of the miniPROFET? series.The lighting driver is configured to have a maximum supply voltage of 52V (Vsup).Normal operation requires Vsup above 6V.
BSP752RXUMA2 Features
Supplied from 13.5V
BSP752RXUMA2 Applications
There are a lot of Infineon Technologies BSP752RXUMA2 Power Switches ICs applications.
- USB Protection
- PDAs
- Storage Drives
- Wireless Headsets
- Gaming
- Set-Top Boxes
- Wearable Devices
- Portable GPS
- Storage (HDDs, SSDs)
- Smartphone and PDA
