BSP75GTA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 550mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated DC | 60V |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.3mm |
| Current Rating | 1.6A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | BSP75G |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Operating Supply Voltage | 12V |
| Voltage | 60V |
| Interface | On/Off |
| Current | 1.4A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 60V |
| Turn-Off Delay Time | 20 μs |
| Continuous Drain Current (ID) | 1.6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 60V |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 550m Ω |
| Drain to Source Resistance | 550MOhm |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BSP75GTA Overview
It is packaged in the manner of a Tape & Reel (TR).It is included with the TO-261-4, TO-261AA package as well.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Auto Restart.As you can see, it comes from the BSP75G family.In total, there are 4 terminations.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.6A.It is possible to achieve a high level of efficiency with a supply voltage of 12V.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 4 pins.Currently, the LED driving board has 550mOhm resistance.This electrical component can be found in the INTELLIFET? series.This case has the output current set to 700mA.For maximum efficiency, the supply voltage should be set to 12V.
BSP75GTA Features
Supplied from 12V
Resistance of 550mOhm
BSP75GTA Applications
There are a lot of Diodes Incorporated BSP75GTA Power Switches ICs applications.
- Various applications equipped with buttons
- HDD, SSD
- Telecom and Network Systems
- Portable Music Players
- Set-Top Boxes
- Portable GPS Device
- Hot Swap
- Hot-Swap Systems
- Low Voltage I/O System Power
- Notebook and Tablet Computers
