BSP76E6433HUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Manufacturer Package Identifier | PG-SOT223-4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 3.8W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | BSP76 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | N-Channel |
| Operating Supply Voltage | 42V |
| Voltage | 42V |
| Interface | On/Off |
| Current | 14A |
| Output Configuration | Low Side |
| Power Dissipation | 3.8W |
| Output Current | 1.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Drain to Source Voltage (Vdss) | 42V |
| Nominal Input Voltage | 42V |
| Continuous Drain Current (ID) | 1.4A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 42V Max |
| Max Dual Supply Voltage | 42V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 150m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Rds On Max | 200 mΩ |
| On-State Resistance | 200mOhm |
| Height | 1.7mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BSP76E6433HUMA1 Overview
Tape & Reel (TR) is how it's packaged.It is included in the package TO-261-4, TO-261AA.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Auto Restart features is available.As you can see, it comes from the BSP76 family.A total of 4 terminations have been recorded.The 4 pins are used for the operation of the system.The LED driver has 1 functions.It is possible to obtain high efficiency with a supply voltage of 12V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.These electrical components are part of the HITFET? series.In this case, the output current will be set to 1.8A.When using this LED driving board, it is recommended that the supply voltage is set to 42V.
BSP76E6433HUMA1 Features
Supplied from 12V
BSP76E6433HUMA1 Applications
There are a lot of Infineon Technologies BSP76E6433HUMA1 Power Switches ICs applications.
- Set-Top Boxes
- Wireless Headsets
- Mobile Communication Devices
- HDD, SSD
- USB3.1 Power Delivery
- PC Card Hot Swap
- Gaming
- HDD and SSD
- USB Ports/Hubs
- Set-top-box
