BSP77E6433HUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 3.8W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | BSP77 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | N-Channel |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 3.8W |
| Output Current | 2.17A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Drain to Source Voltage (Vdss) | 42V |
| Nominal Input Voltage | 42V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 42V Max |
| Max Dual Supply Voltage | 42V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 2.8A |
| Rds On (Typ) | 70m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BSP77E6433HUMA1 Overview
The package is in the form of a Tape & Reel (TR).It is included in the package TO-261-4, TO-261AA.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Auto Restart.It is a member of the BSP77 family.As a result, there are 4 terminations.For operation, 4 pins are used.Currently, the lighting driver has a total of 1 functions.A supply voltage of 12V leads to high efficiency.Surface Mount is mounted in the way of this LED driving board.The LED driver has a total of 4 pins.This electrical component can be found in the HITFET? series.In this case, the output current is set to 2.17A.
BSP77E6433HUMA1 Features
Supplied from 12V
BSP77E6433HUMA1 Applications
There are a lot of Infineon Technologies BSP77E6433HUMA1 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Gaming
- Portable Music Players
- PC Cards
- USB3.1 Power Delivery
- Wireless/Networking Cards
- Set-top-box
- Hot-Swap Systems
- Solid-State Drives
- Hot Swap
