Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-5, DPak (4 Leads + Tab), TO-252AD |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
13.5V |
Base Part Number |
BTF50060 |
JESD-30 Code |
R-PSSO-G4 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
16.5A |
Supply Voltage-Min (Vsup) |
6V |
Interface |
On/Off |
Nominal Supply Current |
12mA |
Output Configuration |
High Side |
Output Current |
16.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
13.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
6V~19V |
Fault Protection |
Open Load Detect, Over Temperature, Over Voltage |
Rds On (Typ) |
6.8m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height Seated (Max) |
2.5mm |
Length |
6.5mm |
Width |
6.22mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
BTF500601TEAAUMA1 Overview
Tape & Reel (TR) is the way it's packaged.It is included with the TO-252-5, DPak (4 Leads + Tab), TO-252AD package as well.The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of P-Channel volts.It is a member of the BTF50060 family.A total of 4 terminations have been recorded.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 16.5A to meet the operation criteria.The supply voltage can be 13.5V for high efficiency.Surface Mount is mounted in the way.It is set to 16.5A in this case.The supply voltage (Vsup) should be kept above 6V for normal operation.
BTF500601TEAAUMA1 Features
Supplied from 13.5V
BTF500601TEAAUMA1 Applications
There are a lot of Infineon Technologies BTF500601TEAAUMA1 Power Switches ICs applications.
- HDD and SSD
- Handheld Devices
- Telecom and Network Systems
- Portable GPS Device
- Notebook and Tablet Computers
- Wireless Headsets
- Smartphone and PDA
- Portable Music Players
- Set-top-box
- PC Card Hot Swap