BTM7811KAUMA1
| Parameters | |
|---|---|
| Current - Peak Output | 42A |
| Load Type | Inductive |
| Height Seated (Max) | 4.4mm |
| Length | 21.6mm |
| Width | 9.25mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-18 (15 Leads + 3 Tabs) |
| Surface Mount | YES |
| Operating Temperature | -40°C~110°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | TrilithIC™ |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Applications | DC Motors, General Purpose |
| HTS Code | 8542.39.00.01 |
| Technology | DMOS |
| Voltage - Supply | 1.8V~42V |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTM7811 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G15 |
| Qualification Status | Not Qualified |
| Interface | Logic |
| Output Configuration | Half Bridge (2) |
| Voltage - Load | 1.8V~42V |
| Fault Protection | Open Load Detect, Over Temperature, Short Circuit, UVLO |
| Turn On Time | 220 µs |
| Output Peak Current Limit-Nom | 14A |
| Rds On (Typ) | 14m Ω LS, 26m Ω HS |
| Turn Off Time | 250 µs |
| Built-in Protections | OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
BTM7811KAUMA1 Overview
H bridge is packaged using Tape & Reel (TR).H bridge is included in the TO-263-18 (15 Leads + 3 Tabs) package as a cost-saving measure.The supply voltage 1.8V~42V has the capabilbridge drivery of improving reliabilbridge drivery.In the way of Surface Mount, H bridge circuit is mounted.Motor driver H bridge is possible for -40°C~110°C TJ to operate normally at motor driver H bridges operating temperature.H bridge motor driver has many applications, including DC Motors, General Purpose.Status Flag is another of full bridges specific characteristics.Transmission lines are terminated with 15 terminations with the H bridge that matches their characteristic impedance.The base H bridge ic number of BTM7811 allows you to find more related H bridge ics by using that number.This is an electronic H-bridge of the TrilithIC? series.Onput current at which output reaches 42A.The 4 pins of this bridge driver work together to allow it to perform its specific functions.
BTM7811KAUMA1 Features
Available in TO-263-18 (15 Leads + 3 Tabs) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BTM7811
Subcategory: 42A
BTM7811KAUMA1 Applications
There are a lot of Infineon Technologies BTM7811KAUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.
- V-Core
- Industrial Pumps
- Bipolar stepper motor
- High current, low profile DC-DC converters
- Industrial Fans
- Quad DC motor
- High-Current DC-DC Point-of-Load Converters
- Workstations
- Compact Blade Servers
- Networking Microprocessor Voltage Regulators
