BTN7960BAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | NovalithIC™ |
| Pbfree Code | no |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 8V~18V |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 13.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTN7960 |
| JESD-30 Code | R-PSSO-G7 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Interface | On/Off |
| Output Configuration | Half Bridge |
| Current - Output | 47A |
| Voltage - Load | 8V~18V |
| Turn On Time | 25 µs |
| Output Peak Current Limit-Nom | 62A |
| Turn Off Time | 17 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Motor Type - AC, DC | Brushed DC |
| Length | 10mm |
| Width | 9.25mm |
| RoHS Status | ROHS3 Compliant |
BTN7960BAUMA1 Overview
The package contains [0].Parts are packaged in TO-263-8, D2Pak (7 Leads + Tab), TO-263CAcases.In most cases, it is recommended to mount the part at Surface Mount.This component is suitable for the component connected to General Purpose.8V~18V volts can be supplied by the device.This device operates at a temperature range of -40°C~150°C TJ.Drivers controllers is possible to classify the motor type as Brushed DC.This part has 7termination options.You can apply voltage at 8V~18Vto the load.Drivers controllers is important to note that this amplifier should be operated at the 13.5Vsetting.Ensure that the part output current remains at 47A.The BTN7960part number is used to locate the part.Drivers controllers is maintained at a voltage of NovalithIC?.
BTN7960BAUMA1 Features
Applications : General Purpose
Load voltage across the chip 8V~18V
base on BTN7960 number
BTN7960BAUMA1 Applications
There are a lot of Infineon Technologies BTN7960BAUMA1 motor drivers applications.
- Display LED backlighting
- Horticultural applications
- Dome
- High brightness LED lighting
- PDAs
- Home lighting systems
- Tunnel lights
- General lighting
- Hospitality buildings
- Industrial high-bay lights
