BTN8962TAAUMA1
| Parameters | |
|---|---|
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | NovalithIC™ |
| JESD-609 Code | e3 |
| Feature | Latch Function, Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | DC Motors, General Purpose |
| Technology | DMOS |
| Voltage - Supply | 5.5V~40V |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Reach Compliance Code | not_compliant |
| Base Part Number | BTN8962 |
| Max Output Current | 70A |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Interface | Logic |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.2mA |
| Output Configuration | Half Bridge |
| Output Current | 42A |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30A |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 5.5V~40V |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 7.5m Ω LS, 6.7m Ω HS |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE; THERMAL |
| Load Type | Inductive |
| Height | 4.5mm |
| Width | 9.25mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
BTN8962TAAUMA1 Description
The Infineon BTN8962TAAUMA1 is a high-current integrated half-bridge IC. PAR TO263-7 MOTOR DRIVER Half Bridge Driver DC Motors, General Purpose DMOS PG-TO263-7 Half Bridge Motor Driver Automotive 8-Pin(7+Tab) BTN8962TAAUMA1 is a Half Bridge Driver DC Motors, General Purpose DMOS PG-TO263-7 TRILITH IC / NOVALITH IC TO-263 T/R Motor / Motion / Ignition Controllers & Drivers One p-channel high-side MOSFET and one n-channel low-side MOSFET with an integrated driver IC make up the NovalithICTM series. Because the P-channel high-side switch eliminates the requirement for a charge pump, EMI is reduced. The integrated driver IC makes connecting to a microcontroller simple, with logic level inputs, current sense diagnosis, slew rate adjustment, dead time creation, and protection against over temperature, under voltage, overcurrent, and short-circuit. The BTN8962TAAUMA1 is a cost-effective solution for protected high-current PWM motor drives that uses very little board space.
BTN8962TAAUMA1 Features
? AEC Qualified
? Operation up to 40V
? Undervoltage shut down
? Green Product (RoHS compliant)
? Driver circuit with logic level inputs
? Current limitation level of 30 A min.
? Adjustable slew rates for optimized EMI
? 7μA at 25°C Typical low quiescent current
? Overtemperature shut down with latch behaviour
? Enhanced switching speed for reduced switching losses
? Switched mode current limitation for reduced power dissipation in overcurrent
BTN8962TAAUMA1 Applications
? Automotive
? Fuel pumps
? Motor Drive & Control
? Electronic parking brake
? Active suspension control
The Infineon BTN8962TAAUMA1 is a high-current integrated half-bridge IC. PAR TO263-7 MOTOR DRIVER Half Bridge Driver DC Motors, General Purpose DMOS PG-TO263-7 Half Bridge Motor Driver Automotive 8-Pin(7+Tab) BTN8962TAAUMA1 is a Half Bridge Driver DC Motors, General Purpose DMOS PG-TO263-7 TRILITH IC / NOVALITH IC TO-263 T/R Motor / Motion / Ignition Controllers & Drivers One p-channel high-side MOSFET and one n-channel low-side MOSFET with an integrated driver IC make up the NovalithICTM series. Because the P-channel high-side switch eliminates the requirement for a charge pump, EMI is reduced. The integrated driver IC makes connecting to a microcontroller simple, with logic level inputs, current sense diagnosis, slew rate adjustment, dead time creation, and protection against over temperature, under voltage, overcurrent, and short-circuit. The BTN8962TAAUMA1 is a cost-effective solution for protected high-current PWM motor drives that uses very little board space.
BTN8962TAAUMA1 Features
? AEC Qualified
? Operation up to 40V
? Undervoltage shut down
? Green Product (RoHS compliant)
? Driver circuit with logic level inputs
? Current limitation level of 30 A min.
? Adjustable slew rates for optimized EMI
? 7μA at 25°C Typical low quiescent current
? Overtemperature shut down with latch behaviour
? Enhanced switching speed for reduced switching losses
? Switched mode current limitation for reduced power dissipation in overcurrent
BTN8962TAAUMA1 Applications
? Automotive
? Fuel pumps
? Motor Drive & Control
? Electronic parking brake
? Active suspension control
