BTN8980TAAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | NovalithIC™ |
| JESD-609 Code | e3 |
| Feature | Latch Function, Slew Rate Controlled, Status Flag |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | DC Motors, General Purpose |
| Additional Feature | SEATED HGT-NOM; SEATED HGT-CALCULATED |
| Technology | DMOS |
| Voltage - Supply | 6V~40V |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Max Output Current | 117A |
| Operating Supply Voltage | 40V |
| Interface | Logic |
| Output Configuration | Half Bridge |
| Halogen Free | Halogen Free |
| Output Current per Channel | 50A |
| Voltage - Load | 6V~40V |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Turn On Time | 40 μs |
| Output Peak Current Limit-Nom | 77A |
| Rds On (Typ) | 4.7m Ω LS, 5.3m Ω HS |
| Turn Off Time | 24 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Load Type | Inductive |
| Height Seated (Max) | 4.5mm |
| Width | 9.25mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTN8980TAAUMA1 Overview
In order to package H bridge, Tape & Reel (TR) is used.For cost-saving purposes, H bridge is included in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package.Improved reliabilbridge drivery can be ensured based on the supply voltage of 6V~40V.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge's operating temperature enables -40°C~150°C TJ to function normally.Among H bridge motor drivers many applications are DC Motors, General Purpose.Using Surface Mount, the board is mounted.Full bridge also has a number of specific characteristics, including Latch Function, Slew Rate Controlled, Status Flag.A transmission line can be terminated at a 7 termination with the H bridge whose characteristic impedance matches the transmission line.An interface using 7 pins is used to provide pronged contact.This H bridge operates with a voltage of 13.5V.This is an electronic H-bridge of the NovalithIC? series.The maximum load current a power supply can provide at a specified ambient temperature is 117A.A bridge driver's 4 pins work together in order to perform its specific functions.It is equipped with outputs in the form of 1.The operating supply voltage is maintained at 40V in order to ensure high efficiency.As an additional option, SEATED HGT-NOM; SEATED HGT-CALCULATED can be provided.
BTN8980TAAUMA1 Features
Available in TO-263-8, D2Pak (7 Leads + Tab), TO-263CA Package / Case
Operating Temperature at the range of Surface Mount
Number of Receivers: 40V
With SEATED HGT-NOM; SEATED HGT-CALCULATED Drivers
BTN8980TAAUMA1 Applications
There are a lot of Infineon Technologies BTN8980TAAUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.
- High-Performance Gaming Motherboards
- OA equipments
- Small Form-Factor Voltage Regulator Modules
- Home Appliances
- Industrial Pumps
- PC peripherals
- Telecom Microprocessor
- High current, low profile DC-DC converters
- DC-DC Converters
- Notebook Computers
