BTS117BKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Tin (Sn) |
| Voltage - Rated DC | 60V |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Current Rating | 3.5A |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 60V |
| Nominal Input Voltage | 60V |
| Turn-Off Delay Time | 150 μs |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Max Dual Supply Voltage | 60V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 25A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS117BKSA1 Overview
A Tube is used to package it.This file is included in package TO-220-3.It has been mounted as Through Hole on the LED driver.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In total, there are 3 terminations.The operation is performed through the 3 pins.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 3.5A.Through Hole is mounted in the way of this lighting driver.A total of 3 pins are present on it.It has a resistance of 120mOhm.It belongs to the HITFET? series.
BTS117BKSA1 Features
Resistance of 120mOhm
BTS117BKSA1 Applications
There are a lot of Infineon Technologies BTS117BKSA1 Power Switches ICs applications.
- Storage Drives
- Wearable Devices
- PC Card Hot Swap
- Portable GPS
- USB Power Distribution
- Smart Phones, Feature Phones
- PDAs
- Wireless/Networking Cards
- Telecom and Network Systems
- Hot-Swap Systems
