BTS133BKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Tin (Sn) |
| Voltage - Rated DC | 60V |
| Max Power Dissipation | 90W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Current Rating | 21A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Operating Supply Voltage | 10V |
| Interface | On/Off |
| Nominal Supply Current | 30μA |
| Output Configuration | Low Side |
| Power Dissipation | 90W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 7A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Drain to Source Voltage (Vdss) | 60V |
| Nominal Input Voltage | 60V |
| Turn-Off Delay Time | 170 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Max Dual Supply Voltage | 60V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 28A |
| Rds On (Typ) | 40m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS133BKSA1 Overview
Tube is the way it's packaged.This file is included in package TO-220-3.The lighting driver is mounted in the Through Hole position.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.There are 3 terminations in it.3 pins are used for operation.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 7A in order to meet the operation criteria.Through Hole is mounted in the way of this lighting driver.Currently, the LED driving board has 120mOhm resistance.A component of this type is included in the HITFET? series.The output current is set to 7A in this case.In order to maximize efficiency, the supply voltage should be set at 10V.The maximum current required for its operation is 7A.
BTS133BKSA1 Features
Resistance of 120mOhm
BTS133BKSA1 Applications
There are a lot of Infineon Technologies BTS133BKSA1 Power Switches ICs applications.
- USB Ports/Hubs
- Hot Swaps
- Smartphone and PDA
- Wireless Headsets
- Telecom and Network Systems
- Set-Top Boxes
- Portable Music Players
- Portable Video Game Players
- Gaming
- USB Protection
