BTS3028SDLATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 2.28mm |
| Base Part Number | BTS3028 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | Low Side |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 60V |
| Nominal Input Voltage | 10V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Max Dual Supply Voltage | 60V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5.8A |
| Rds On (Typ) | 28m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.5mm |
| Length | 6.5mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS3028SDLATMA1 Overview
A Tape & Reel (TR) is used to package it.This file is included in package TO-252-3, DPak (2 Leads + Tab), SC-63.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.I believe it belongs to the BTS3028 family.As a result, there are 2 terminations.It consists of 1 functions.It is necessary to reduce the maximum output current to 5A to meet the operation criteria.The supply voltage of 13.5V is conducive to high efficiency.Surface Mount is mounted in the way.In total, it has 4 pins.These electrical components are part of the HITFET? series.This case has the output current set to 5A.In order to operate normally, the supply voltage (Vsup) must be maintained above 8V.
BTS3028SDLATMA1 Features
Supplied from 13.5V
BTS3028SDLATMA1 Applications
There are a lot of Infineon Technologies BTS3028SDLATMA1 Power Switches ICs applications.
- Notebook PC
- USB Protection
- Portable Video Game Players
- USB Power Distribution
- Gaming
- Portable/Handheld Devices
- Wearable Devices
- PDAs
- Set-top-box
- HDD, SSD
