Parameters |
Output Configuration |
Low Side |
Output Current |
5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Drain to Source Voltage (Vdss) |
60V |
Nominal Input Voltage |
10V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
60V Max |
Max Dual Supply Voltage |
60V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
5.8A |
Rds On (Typ) |
28m Ω |
Turn Off Time |
200 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Height Seated (Max) |
2.5mm |
Length |
6.5mm |
Width |
6.22mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
HITFET® |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
13.5V |
Terminal Pitch |
2.28mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
BTS3028 |
Pin Count |
4 |
JESD-30 Code |
R-PSSO-G2 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Type |
N-Channel |
Max Output Current |
5A |
Supply Voltage-Min (Vsup) |
8V |
Interface |
On/Off |
Nominal Supply Current |
10μA |
BTS3028SDRATMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.This object belongs to the BTS3028 family.It consists of 2 terminations in total.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 5A.It is possible to obtain high efficiency with a supply voltage of 13.5V.Surface Mount is mounted in the way of this lighting driver.The LED driver has a total of 4 pins.These electrical components are part of the HITFET? series.The output current is set to 5A in this case.For normal operation, the supply voltage (Vsup) must be kept above 8V.
BTS3028SDRATMA1 Features
Supplied from 13.5V
BTS3028SDRATMA1 Applications
There are a lot of Infineon Technologies BTS3028SDRATMA1 Power Switches ICs applications.
- Solid State Drivers
- Portable Devices
- PC Cards
- Hot-Swap Systems
- Gaming
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- HDD, SSD
- HDD and SSD
- USB Power Distribution