BTS3046SDRATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Base Part Number | BTS3046 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.6A |
| Number of Elements | 1 |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Output Current | 3.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 60V |
| Nominal Input Voltage | 10V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Max Dual Supply Voltage | 60V |
| Drain-source On Resistance-Max | 0.208Ohm |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 46m Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS3046SDRATMA1 Overview
The package is in the form of a Tape & Reel (TR).There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.The BTS3046 family consists of this type.It consists of 2 terminations in total.The maximum output current must drop to 3.6A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.The LED driving board is equipped with a total of 4 pins.A component of this type is included in the HITFET? series.It is set to 3.6A in this case.Total, there are 1 elements.To name a few, the lighting driver has SWITCHING transistor application.
BTS3046SDRATMA1 Features
Transistor applications such as SWITCHING
BTS3046SDRATMA1 Applications
There are a lot of Infineon Technologies BTS3046SDRATMA1 Power Switches ICs applications.
- Set-Top Boxes
- Smart Phones, Feature Phones
- Mobile Communication Devices
- Hot Swap
- Storage (HDDs, SSDs)
- Solid-State Drives
- Wearable Devices
- Portable Devices
- PDAs
- Handheld Devices
