BTS308 E3062A
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~34V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 50 µs |
| Output Peak Current Limit-Nom | 1.3A |
| Rds On (Typ) | 270m Ω |
| Turn Off Time | 55 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 9.9mm |
| Width | 9.2mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | BTS308 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Interface | On/Off |
| Current - Output (Max) | 1.18A |
| Output Configuration | High Side |
BTS308 E3062A Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package, it is included.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the family BTS308.It has a total of 4 terminations.As far as functions are concerned, the lighting driver has 1.From the lighting driver, there is a maximum output of 1.18AV.The supply voltage of 24V is conducive to high efficiency.This LED driver is equipped with a total of 3 pins.This electrical component is part of the PROFET? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage is set to 34V.Normal operation requires a voltage above 4.7V for the supply voltage.
BTS308 E3062A Features
Supplied from 24V
BTS308 E3062A Applications
There are a lot of Infineon Technologies BTS308 E3062A Power Switches ICs applications.
- PC Cards
- Low Voltage I/O System Power
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Hot-Swap Systems
- Wireless Modem Data Cards
- Solid State Drivers
- Handheld Devices
- Wireless Headsets
- Hot Swap
