BTS3104SDRATMA1
| Parameters | |
|---|---|
| Published | 2004 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.28mm |
| Base Part Number | BTS3104 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | Low Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 60V |
| Nominal Input Voltage | 10V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Max Dual Supply Voltage | 60V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 104m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.35mm |
| Length | 6.5mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
BTS3104SDRATMA1 Overview
Tape & Reel (TR) is how it's packaged.Package TO-252-3, DPak (2 Leads + Tab), SC-63 contains it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has a total of 1 outputs.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.It belongs to the family BTS3104.In total, there are 3 terminations.The LED driver has 1 functions.In order to meet the operation criteria, the maximum output current drops to 2A.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.The LED driver has a total of 4 pins.A component of this type is included in the HITFET? series.In this case, the output current will be set to 2A.For normal operation, the supply voltage (Vsup) should be kept above 2V.
BTS3104SDRATMA1 Features
Supplied from 5V
BTS3104SDRATMA1 Applications
There are a lot of Infineon Technologies BTS3104SDRATMA1 Power Switches ICs applications.
- Hot Swap
- Notebook PC
- USB Ports/Hubs
- Set-Top Boxes
- USB Power Distribution
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Smart Phones, Feature Phones
- PC Cards
- Portable/Handheld Devices
