BTS3256DAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | BTS3256 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G5 |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Output Type | N-Channel |
| Max Output Current | 7.5A |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | Low Side |
| Output Current | 7.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 40V |
| Nominal Input Voltage | 30V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~30V |
| Max Dual Supply Voltage | 40V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Turn On Time | 60 μs |
| Output Peak Current Limit-Nom | 55A |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.35mm |
| Length | 6.5mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS3256DAUMA1 Overview
It is package in Tape & Reel (TR) case.This file is included in package TO-252-5, DPak (4 Leads + Tab), TO-252AD.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart, Slew Rate Controlled.It belongs to the BTS3256 family.In total, there are 5 terminations.It consists of 1 functions.This operation requires the maximum output current to be decreased to 7.5A.It is possible to achieve a high level of efficiency with a supply voltage of 10V.The lighting driver is mounted in the way of Surface Mount.There are 4 pins in total on this board.The HITFET? series includes this electrical component.The output current is set to 7.5A in this case.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5.5V.
BTS3256DAUMA1 Features
Supplied from 10V
BTS3256DAUMA1 Applications
There are a lot of Infineon Technologies BTS3256DAUMA1 Power Switches ICs applications.
- Set-Top Boxes
- Portable Music Players
- Smartphone and PDA
- Notebook and Tablet Computers
- Notebook PC
- Portable GPS Device
- Portable Video Game Players
- Solid State Drivers
- Wireless/Networking Cards
- Wireless Headsets
