BTS3408GXUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 880mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | BTS3408 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 60V |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 60V |
| Voltage | 60V |
| Interface | Parallel |
| Nominal Supply Current | 1.5mA |
| Current | 550mA |
| Output Configuration | Low Side |
| Power Dissipation | 880mW |
| Output Current | 550mA |
| Max Supply Current | 1.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 8 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 60V |
| Nominal Input Voltage | 60V |
| Turn-Off Delay Time | 8 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Max Dual Supply Voltage | 60V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 0.55A |
| Rds On (Typ) | 480m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 1.45mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS3408GXUMA2 Description
BTS3408GXUMA2 is a dual-channel low-end switch with D-MOS output stage, which is used to drive resistive, capacitive and inductive loads. The design is based on Infineon Intelligent Power Technology (SPT) and allows bipolar, CMOS and power D-MOS devices to be implemented on the same monolithic circuit. BTS3408G has embedded protection function and is specially designed for automotive and industrial applications. It is especially suitable for driving stepper motors and production lines.
BTS3408GXUMA2 Features
? Logic level input
? Compatible to 3V micro controllers
? ESD protection
? Thermal shutdown with auto restart
? Overload protection
? Short circuit protection
? Over voltage protection
? Open load detection (during Off)
? Current limitation
? Direct parallel control of the inputs
? FREEZE functionality for multiplexing
? General fault flag
? Very low standby quiescent current
? Switching frequencies up to 50kHz
? Green Product (RoHS compliant)
? AEC Qualified
BTS3408GXUMA2 Application
? All kinds of resistive, inductive and capacitive loads in switching applications
? μC compatible power switch for 12 V, 24 V and 42 V applications
? Replaces electromechanical relays and discrete circuits
? Line, stepper motor, lamp and relay driver
