BTS409L1
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | NO |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1997 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS409L1 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 1.8mA |
| Output Configuration | High Side |
| Power Dissipation | 18W |
| Output Current | 1.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 7.5A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 15.6mm |
| Width | 9.9mm |
| Thickness | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
BTS409L1 Overview
As you can see, it's packaged in the way of a Tube.It is included in the package TO-220-5 Formed Leads.Mounting type Through Hole is selected for the LED driving board.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.The BTS409L1 family consists of this type.In total, there are 6 terminations.The 5 pins are used to operate the LED driver.The LED driver has 1 functions.The maximum output current is reduced to 1.8A to meet the operation criteria.Supply voltages of 12V allow for high efficiency.The LED driving board is equipped with a total of 3 pins.This electrical component is included in the PROFET? series.In this case, the output current is set to 1.8A.The LED driver is self-contained in an econtainer with MOSFET Drivers capacity.Vsup (maximum supply voltage) is set to 34V.For normal operation, the supply voltage (Vsup) should be kept above 5V.
BTS409L1 Features
Supplied from 12V
BTS409L1 Applications
There are a lot of Infineon Technologies BTS409L1 Power Switches ICs applications.
- HDD and SSD
- USB Ports/Hubs
- USB Power Distribution
- Low Voltage I/O System Power
- Portable/Handheld Devices
- Portable Music Players
- Portable GPS Device
- Hot Swap
- Hot Swap
- Mobile Communication Devices
