BTS409L1E3062ABUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 18W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G6 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 1.8A |
| Nominal Supply Current | 1.8mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 200 μs |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Nominal Input Voltage | 43V |
| Turn-Off Delay Time | 200 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Number of Drivers | 1 |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 7.5A |
| Rds On (Typ) | 160m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 4.7mm |
| Length | 9.9mm |
| Width | 9.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS409L1E3062ABUMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package contains it.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Auto Restart features.It contains 6 terminations.In order to operate, the 5 pins are used.The LED driving board has a total of 1 functions.There is a maximum output of 1.8AV from the LED driver.The supply voltage can be 12V for high efficiency.This lighting driver is mounted in the way of Surface Mount.It is part of the PROFET? series.The LED driver is configured with a maximum supply voltage of 34V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 5V.A total of 1 drivers are included in this part.
BTS409L1E3062ABUMA1 Features
Supplied from 12V
BTS409L1E3062ABUMA1 Applications
There are a lot of Infineon Technologies BTS409L1E3062ABUMA1 Power Switches ICs applications.
- Solid State Drivers
- Portable GPS Device
- Smartphone and PDA
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- USB Power Distribution
- Set-Top Boxes
- Hot Swaps
- PC Card Hot Swap
