BTS410E2E3043NKSA1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Max Power Dissipation | 50W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | BTS410E2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Power Dissipation | 50W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 190m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | Non-RoHS Compliant |
BTS410E2E3043NKSA1 Overview
Tube is how it's packaged.This package is included in TO-220-5.Through Hole is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.It is equipped with Auto Restart, Status Flag features.It belongs to the family BTS410E2.As a result, there are 5 terminations.For operation, we use the 5 pins.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 1.6A.Supply voltages of 12V allow for high efficiency.It is positioned in the direction of Through Hole.This electrical component is included in the PROFET? series.The output current is set to 1.6A in this case.The maximum supply voltage is set to 42V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.7V.
BTS410E2E3043NKSA1 Features
Supplied from 12V
BTS410E2E3043NKSA1 Applications
There are a lot of Infineon Technologies BTS410E2E3043NKSA1 Power Switches ICs applications.
- PC Card Hot Swap
- Smartphone and PDA
- Hot Swaps
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Wireless Headsets
- PC Cards
- Set-top-box
- Portable Music Players
- Smart Phones, Feature Phones
