BTS410E2NKSA1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 50W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | BTS410E2 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Power Dissipation | 50W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 190m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
BTS410E2NKSA1 Overview
The package is in the form of a Tube.The TO-220-5 Formed Leads package includes it.The lighting driver has the mounting type Through Hole.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.There is a BTS410E2 family of things that it belongs to.It contains 5 terminations.For operation, 5 pins are used.There are 1 functions of the LED driver.Maximum output current falls to 1.6A when operation criteria are met.With a supply voltage of 12V, high efficiency is possible.The LED driving board is mounted in the way of Through Hole.As a result, it has a total of 3 pins.These electrical components are part of the PROFET? series.As a result, the output current is set to 1.6A.The LED driver is configured with a maximum supply voltage of 42V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.7V.
BTS410E2NKSA1 Features
Supplied from 12V
BTS410E2NKSA1 Applications
There are a lot of Infineon Technologies BTS410E2NKSA1 Power Switches ICs applications.
- USB Protection
- Hot Swap
- Notebook and Tablet Computers
- Portable/Handheld Devices
- Portable GPS Device
- Wireless/Networking Cards
- Telecom and Network Systems
- Portable Devices
- Portable Music Players
- Wearable Devices
