banner_page

BTS410F2

1 Hot Swap Controllers TO-220-5 1


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BTS410F2
  • Package: TO-220-5
  • Datasheet: -
  • Stock: 902
  • Description: 1 Hot Swap Controllers TO-220-5 1 (Kg)

Details

Tags

Parameters
Package / Case TO-220-5
Surface Mount NO
Number of Pins 5
JESD-609 Code e0
Number of Terminations 5
ECCN Code EAR99
Resistance 190mOhm
Terminal Finish TIN LEAD
Max Operating Temperature 150°C
Min Operating Temperature -40°C
Subcategory MOSFET Drivers
Technology MOS
Terminal Position ZIG-ZAG
Terminal Form THROUGH-HOLE
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 12V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 3
Qualification Status Not Qualified
Max Output Current 5.5A
Operating Supply Voltage 42V
Number of Channels 1
Max Supply Voltage 42V
Min Supply Voltage 4.7V
Power Dissipation-Max 50W
Max Supply Current 2.1mA
Current - Output 1.8A
Turn On Delay Time 125 μs
Halogen Free Not Halogen Free
Output Current per Channel 1.8A
Turn-Off Delay Time 85 μs
Interface IC Type BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Output Peak Current Limit-Nom 1.8A
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
RoHS Status RoHS Compliant
Lead Free Contains Lead

BTS410F2 Overview


The TO-220-5 package contains it.Currently, 1 channels can be accessed.The 5 terminations total to three.Device ZIG-ZAG is located at the terminal position.3 pins make up its total.High efficiency is possible at a voltage of 12V.Hot-swappable device is necessary to use 5 pins in order to operate the device.MOSFET Drivers contains this gadget on its own.Stable operation is enabled by a maximum operating temperature of 150°C°C.Hot-swappable device works at a minimum temperature of -40°C degrees Celsius to maintain reliabilHot-swappable devicey.An input voltage of 42VV is the maximum it can handle.With 4.7VV, it can work with the lowest supply voltage possible.In order to meet the operation criteria, the maximum output current has to be reduced to 5.5A.During operation, it will require a maximum current of 2.1mA.190mOhm resistance is present in the device.

BTS410F2 Features


The terminal position of 3

BTS410F2 Applications


There are a lot of Infineon Technologies BTS410F2 hot swap controllers applications.

  • Raid
  • Automatic restart after load failure
  • Active current limit
  • Disconnect faulty loads before supply voltage drops
  • Power monitoring
  • Firewire
  • Undervoltage protection
  • Safe board insertion and extraction
  • Short circuit protection
  • Limitting the inrush current

Write a review

Note: HTML is not translated!
    Bad           Good