BTS410F2 E3043
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | BTS410F2 |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 42V |
| Power Supplies | 4.5/42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Interface | On/Off |
| Current - Output (Max) | 1.6A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5.5A |
| Rds On (Typ) | 190m Ω |
| Turn Off Time | 85 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| RoHS Status | Non-RoHS Compliant |
BTS410F2 E3043 Overview
The LED driver's packaged as a Tube.This package is included in TO-220-5.The mounting type of the LED driver is Through Hole.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.The BTS410F2 family consists of this type.There are 5 terminations in it.Currently, there are 1 functions associated with the lighting driver.In terms of output, the lighting driver can provide a maximum of 1.6A V.It is possible to achieve a high level of efficiency with a supply voltage of 12V.There are 3 pins in total on this board.It belongs to the PROFET? series.A container with a capacity of MOSFET Drivers contains this self-contained lighting driver.In this case, Vsup (maximum supply voltage) is set to 42V.In order to operate normally, the supply voltage (Vsup) must be maintained above 4.7V.A 4.5/42V power supply is used by the part.
BTS410F2 E3043 Features
Supplied from 12V
BTS410F2 E3043 Applications
There are a lot of Infineon Technologies BTS410F2 E3043 Power Switches ICs applications.
- Portable Devices
- Mobile Communication Devices
- Portable GPS
- Wireless/Networking Cards
- USB Protection
- Smartphone and PDA
- Set-top-box
- Wireless Headsets
- USB Power Distribution
- PC Card Hot Swap
