Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
Surface Mount |
YES |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Cut Tape (CT) |
Published |
1997 |
Series |
PROFET® |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Additional Feature |
SEATED HGT-NOM; SEATED HGT-CALCULATED |
Subcategory |
Peripheral Drivers |
Technology |
MOS |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
12V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
BTS410F2 |
JESD-30 Code |
R-PSSO-G4 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Type |
N-Channel |
Supply Voltage-Max (Vsup) |
42V |
Supply Voltage-Min (Vsup) |
4.7V |
Interface |
On/Off |
Current - Output (Max) |
1.6A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
4.7V~42V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
1.8A |
Rds On (Typ) |
190m Ω |
Turn Off Time |
85 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Height Seated (Max) |
4.5mm |
Width |
9.25mm |
RoHS Status |
Non-RoHS Compliant |
BTS410F2 E3062A Overview
A Cut Tape (CT) is used to package it.The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package contains it.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Auto Restart, Status Flag features.It belongs to the BTS410F2 family.In total, there are 4 terminations.As far as the lighting driver is concerned, there are 1 functions.The maximum output of the LED driving board is 1.6AV.Using a voltage of 12V allows for high efficiency.This electrical component is included in the PROFET? series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In this LED driver, the maximum supply voltage is configured to be 42V (Vsup).The supply voltage (Vsup) should be kept above 4.7V for normal operation.With the help of this lighting driver, SEATED HGT-NOM; SEATED HGT-CALCULATED can also be produced.
BTS410F2 E3062A Features
Supplied from 12V
Additional features like SEATED HGT-NOM; SEATED HGT-CALCULATED
BTS410F2 E3062A Applications
There are a lot of Infineon Technologies BTS410F2 E3062A Power Switches ICs applications.
- PC Card Hot Swap
- HDD, SSD
- Hot Swap
- USB Ports/Hubs
- Storage (HDDs, SSDs)
- Set-top-box
- Wireless Modem Data Cards
- Solid State Drivers
- Mobile Communication Devices
- Telecom and Network Systems