BTS410F2NKSA1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 50W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | BTS410F2 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Power Dissipation | 50W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 190m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
BTS410F2NKSA1 Overview
The LED driver's packaged as a Tube.In the TO-220-5 Formed Leads package, it is included.The lighting driver is mounted in the Through Hole position.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.It has a total of Auto Restart, Status Flag features.The BTS410F2 family consists of this type.A total of 5 terminations have been found in it.The 5 pins are used to operate the LED driver.It consists of 1 functions.The maximum output current is reduced to 1.6A to meet the operation criteria.The supply voltage of 12V is conducive to high efficiency.As a result, it is mounted in the manner of Through Hole.There are 3 pins in total on this board.It is part of the PROFET? series.The output current is set to 1.6A in this case.The maximum supply voltage for this lighting driver is set to 42V (Vsup).The supply voltage (Vsup) should be kept above 4.7V for normal operation.
BTS410F2NKSA1 Features
Supplied from 12V
BTS410F2NKSA1 Applications
There are a lot of Infineon Technologies BTS410F2NKSA1 Power Switches ICs applications.
- Notebook and Tablet Computers
- Hot Swap
- Hard Disk Drives
- Set-Top Boxes
- PC Cards
- Various applications equipped with buttons
- Portable Video Game Players
- Gaming
- Notebook PC
- PDAs
