BTS4130QGAXUMA1
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS4130 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 3.3mA |
| Output Configuration | High Side |
| Power Dissipation | 1.4W |
| Output Current | 2.1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 20V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~20V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 250 µs |
| Output Peak Current Limit-Nom | 1.1A |
| Rds On (Typ) | 130m Ω |
| Turn Off Time | 270 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
BTS4130QGAXUMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package 20-SOIC (0.295, 7.50mm Width).In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 4 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the BTS4130 family.A total of 20 terminations can be found in it.The 20 pins are used for the operation of the system.It consists of 1 functions.It is possible to obtain high efficiency with a supply voltage of 12V.This lighting driver is mounted in the way of Surface Mount.20 pins are equipped with it.The output current is set to 2.1A in this case.Normal operation requires a voltage above 5.5V for the supply voltage.
BTS4130QGAXUMA1 Features
Supplied from 12V
BTS4130QGAXUMA1 Applications
There are a lot of Infineon Technologies BTS4130QGAXUMA1 Power Switches ICs applications.
- Hot Swaps
- Wireless Headsets
- Various applications equipped with buttons
- HDD, SSD
- Wearable Devices
- Portable GPS
- Solid-State Drives
- USB Power Distribution
- Wireless/Networking Cards
- Notebook PC
