BTS4141NHUMA1
| Parameters | |
|---|---|
| Terminal Pitch | 2.3mm |
| Base Part Number | BTS4141 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 1.4W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Nominal Input Voltage | 48V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 12V~45V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 150m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
BTS4141NHUMA1 Overview
Tape & Reel (TR) is how it's packaged.In the TO-261-4, TO-261AA package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.Auto Restart features are available on the lighting driver.It is a member of the BTS4141 family.A total of 4 terminations have been found in it.The operation is performed through the 4 pins.The LED driving board has a total of 1 functions.The maximum output current is reduced to 700mA to meet the operation criteria.Using a voltage of 15V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 4 pins.The output current is set to 700mA in this case.
BTS4141NHUMA1 Features
Supplied from 15V
BTS4141NHUMA1 Applications
There are a lot of Infineon Technologies BTS4141NHUMA1 Power Switches ICs applications.
- Wireless/Networking Cards
- USB Protection
- Hard Disk Drives
- Notebook PC
- Portable GPS
- PDAs
- Hot Swap
- Set-Top Boxes
- USB Power Distribution
- Notebook and Tablet Computers
