BTS4160DGAXUMA1
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 20V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~20V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 160m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 8.69mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS4160 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.7mA |
| Output Configuration | High Side |
| Power Dissipation | 900mW |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
BTS4160DGAXUMA1 Overview
The package is in the form of a Tape & Reel (TR).There is a 14-SOIC (0.154, 3.90mm Width) package that includes it.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 2 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.It has a total of Status Flag features.As you can see, it comes from the BTS4160 family.There are 14 terminations in it.In order to operate, the 14 pins are used.As far as functions are concerned, the lighting driver has 1.As a result, the maximum output current is reduced to 1.7A in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 12V.The lighting driver is mounted in the direction of Surface Mount.A total of 14 pins are present on it.This case has the output current set to 1.7A.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5.5V.
BTS4160DGAXUMA1 Features
Supplied from 12V
BTS4160DGAXUMA1 Applications
There are a lot of Infineon Technologies BTS4160DGAXUMA1 Power Switches ICs applications.
- Hard Disk Drives
- Hot-Swap Systems
- Portable Music Players
- HDD and SSD
- Low Voltage I/O System Power
- Wireless/Networking Cards
- HDD, SSD
- PDAs
- Mobile Communication Devices
- Set-Top Boxes
