BTS4175SGAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS4175 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 52V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 1.5W |
| Output Current | 1.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 16V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~52V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.3A |
| Rds On (Typ) | 175m Ω |
| Turn Off Time | 200 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS4175SGAXUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package includes it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.This object belongs to the BTS4175 family.In total, there are 8 terminations.During operation, the 8 pins are used.Currently, there are 1 functions associated with the lighting driver.High efficiency is possible when the supply voltage is set to 13.5V.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 8 pins.This case results in a 1.3A output current.The maximum supply voltage for this LED driver is 52V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 6V.
BTS4175SGAXUMA1 Features
Supplied from 13.5V
BTS4175SGAXUMA1 Applications
There are a lot of Infineon Technologies BTS4175SGAXUMA1 Power Switches ICs applications.
- Wearable Devices
- Hot Swap
- Handheld Devices
- Notebook PC
- Telecom and Network Systems
- Solid State Drivers
- Wireless Modem Data Cards
- Solid-State Drives
- Hot Swaps
- Portable GPS
