BTS426L1
| Parameters | |
|---|---|
| Reach Compliance Code | unknown |
| Base Part Number | BTS426L1 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5.8A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 1.8mA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 5.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Rds On (Typ) | 50m Ω |
| Turn Off Time | 450 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 5.6V |
BTS426L1 Overview
As a result, it is packaged in the form of a Tube.The TO-220-5 Formed Leads package contains it.This LED driving board is mounted using the mounting type Through Hole.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Auto Restart, Status Flag.It is a member of the BTS426L1 family.A total of 5 terminations can be found in it.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 5.8A.The supply voltage can be 5.6V for high efficiency.The lighting driver is mounted in the way of Through Hole.A total of 3 pins are present on it.It is included in the PROFET? series.When this case is used, the output current is set to 5.8A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The LED driver is configured with a maximum supply voltage of 34V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5V.
BTS426L1 Features
Supplied from 5.6V
BTS426L1 Applications
There are a lot of Infineon Technologies BTS426L1 Power Switches ICs applications.
- PDAs
- Hard Disk Drives
- HDD and SSD
- Storage Drives
- USB3.1 Power Delivery
- USB Power Distribution
- USB Power Distribution
- Set-top-box
- Gaming
- Wireless Modem Data Cards
