BTS426L1 E3062A
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | SEATED HGT-NOM |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS426L1 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 5.8A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 50m Ω |
| Turn Off Time | 450 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| Width | 9.25mm |
| RoHS Status | Non-RoHS Compliant |
BTS426L1 E3062A Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.As a default, the output is set to 1.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.In terms of features, the LED driving board has Auto Restart, Status Flag.It is a member of the BTS426L1 family.It contains 4 terminations.Currently, the lighting driver has a total of 1 functions.The maximum output of the LED driving board is 5.8AV.High efficiency is possible at 12V supply voltage.This electrical component is included in the PROFET? series.Vsup (maximum supply voltage) is set to 34V.Normal operation requires a voltage above 5V for the supply voltage.With the help of this lighting driver, SEATED HGT-NOM can also be produced.
BTS426L1 E3062A Features
Supplied from 12V
Additional features like SEATED HGT-NOM
BTS426L1 E3062A Applications
There are a lot of Infineon Technologies BTS426L1 E3062A Power Switches ICs applications.
- HDD, SSD
- Smart Phones, Feature Phones
- Notebook PC
- Set-Top Boxes
- PC Card Hot Swap
- Notebook and Tablet Computers
- Handheld Devices
- USB Power Distribution
- Hot Swap
- HDD and SSD
