BTS426L1E3062ANTMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SMD/SMT |
| Number of Pins | 5 |
| Packaging | Tape and Reel |
| Number of Terminations | 4 |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5.6V |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 75W |
| Current - Output | 5.8A |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Turn On Time | 400 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 4.4mm |
| Length | 9.2mm |
| Width | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS426L1E3062ANTMA1 Overview
You can find it in the SMD/SMT package.The package looks like a Tape and Reel.Total terminations are 4.In this case, the device is located at terminal SINGLE.High efficiency can be achieved when the supply voltage is 5.6V.Operating the device requires 5 pins.As you can see, it is positioned in the direction of Surface Mount.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.The supply voltage (Vsup) should be kept above 5V for normal operation.Hot-swappable device is set to 34V (maximum supply voltage).The default setting is output 1.
BTS426L1E3062ANTMA1 Features
BTS426L1E3062ANTMA1 Applications
There are a lot of Infineon Technologies BTS426L1E3062ANTMA1 hot swap controllers applications.
- Inrush current control
- Solid state circuit breakers
- Current monitoring
- Power supply hotswap & inrush control
- Switch
- Distributed power systems
- Network router
- Disconnect faulty loads before supply voltage drops
- Industrial application
- Network switch
