BTS4300SGAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 800mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS4300 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 1.3mA |
| Output Configuration | High Side |
| Power Dissipation | 800mW |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 34V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.4A |
| Rds On (Typ) | 300m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS4300SGAXUMA1 Overview
Tape & Reel (TR) is the way it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Status Flag features in order for it to be useful.It comes under the family of BTS4300.The termination count is 8.During operation, the 8 pins are used.It consists of 1 functions.High efficiency is possible at 13.5V supply voltage.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 8 pins.The output current is set to 400mA in this case.For normal operation, the supply voltage (Vsup) must be kept above 5V.
BTS4300SGAXUMA1 Features
Supplied from 13.5V
BTS4300SGAXUMA1 Applications
There are a lot of Infineon Technologies BTS4300SGAXUMA1 Power Switches ICs applications.
- PDAs
- Storage (HDDs, SSDs)
- Set-top-box
- Portable Devices
- USB Ports/Hubs
- Gaming
- Hot Swap
- Wireless Headsets
- Smartphone and PDA
- Portable/Handheld Devices
