BTS432E2E3062ABUMA1
| Parameters | |
|---|---|
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | BTS432E2 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 42V |
| Interface | On/Off |
| Nominal Supply Current | 1.1mA |
| Output Configuration | High Side |
| Power Dissipation | 125W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 300 µs |
| Output Peak Current Limit-Nom | 44A |
| Rds On (Typ) | 30m Ω |
| Turn Off Time | 80 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 9.9mm |
| Width | 9.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 125W |
BTS432E2E3062ABUMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.As you can see, it comes from the BTS432E2 family.A total of 5 terminations have been recorded.The 5 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.As long as the supply voltage is 12V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.A total of 3 pins are present on it.This electrical component is included in the PROFET? series.When this is the case, the output current is set to 9A.In this LED driver, the maximum supply voltage is configured to be 42V (Vsup).
BTS432E2E3062ABUMA1 Features
Supplied from 12V
BTS432E2E3062ABUMA1 Applications
There are a lot of Infineon Technologies BTS432E2E3062ABUMA1 Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable Devices
- Storage Drives
- USB Ports/Hubs
- PC Card Hot Swap
- PDAs
- Mobile Communication Devices
- Wireless/Networking Cards
- Various applications equipped with buttons
- Telecom and Network Systems
