BTS441TAKSA1
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Series | PROFET® |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS441 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 17A |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~43V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 200 μs |
| Output Peak Current Limit-Nom | 21A |
| Rds On (Typ) | 15m Ω |
| Turn Off Time | 250 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Width | 9.25mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
BTS441TAKSA1 Overview
Tube is the way it's packaged.This package is included in TO-220-5 Formed Leads.The LED driver is mounted as Through Hole.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.It belongs to the family BTS441.A total of 4 terminations have been recorded.The LED driver has 1 functions.The maximum output current must drop to 17A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.There are 4 pins in total on this board.It is part of the PROFET? series.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.75V.
BTS441TAKSA1 Features
Supplied from 5V
BTS441TAKSA1 Applications
There are a lot of Infineon Technologies BTS441TAKSA1 Power Switches ICs applications.
- HDD and SSD
- Wireless Headsets
- Wireless Modem Data Cards
- Hot Swap
- Portable Music Players
- Telecom and Network Systems
- USB Protection
- Set-top-box
- Wearable Devices
- Handheld Devices
