BTS441TGNTMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 43V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 125W |
| Output Current | 17A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~43V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 200 µs |
| Output Peak Current Limit-Nom | 21A |
| Rds On (Typ) | 15m Ω |
| Turn Off Time | 250 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Width | 9.25mm |
| RoHS Status | Non-RoHS Compliant |
BTS441TGNTMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The termination count is 4.It consists of 1 functions.With a supply voltage of 12V, high efficiency is possible.Surface Mount is mounted in the way.This LED driver is equipped with a total of 4 pins.It belongs to the Automotive, AEC-Q100 series.This case has the output current set to 17A.Vsup (maximum supply voltage) is set to 43V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.75V.
BTS441TGNTMA1 Features
Supplied from 12V
BTS441TGNTMA1 Applications
There are a lot of Infineon Technologies BTS441TGNTMA1 Power Switches ICs applications.
- Portable/Handheld Devices
- HDD, SSD
- Notebook PC
- Portable Video Game Players
- Set-Top Boxes
- Hard Disk Drives
- Mobile Communication Devices
- USB3.1 Power Delivery
- Wireless Headsets
- Portable GPS
