BTS442E2BKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 167W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | BTS442E2 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Voltage | 63V |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 42V |
| Interface | On/Off |
| Current - Output (Max) | 17A |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 167W |
| Output Current | 21A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 350 μs |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Nominal Input Voltage | 6V |
| Turn-Off Delay Time | 130 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 70A |
| Rds On (Typ) | 15m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| On-State Resistance | 18mOhm |
| Height | 19.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS442E2BKSA1 Overview
Tube is the way it's packaged.It is included with the TO-220-5 Formed Leads package as well.In this case, the LED driving board is mounted as Through Hole.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Auto Restart, Status Flag features.It comes under the family of BTS442E2.The termination count is 5.In order to operate, the 5 pins are used.The LED driving board has a total of 1 functions.In this case, the LED driving board can produce only 17AV as its maximum output.It is possible to achieve a high level of efficiency with a supply voltage of 12V.Through Hole is mounted in the way of this LED driving board.This LED driver is equipped with a total of 3 pins.These electrical components are part of the PROFET? series.In this case, the output current will be set to 21A.Vsup (maximum supply voltage) is set to 42V.
BTS442E2BKSA1 Features
Supplied from 12V
BTS442E2BKSA1 Applications
There are a lot of Infineon Technologies BTS442E2BKSA1 Power Switches ICs applications.
- Hard Disk Drives
- Various applications equipped with buttons
- HDD and SSD
- Portable Music Players
- Portable Devices
- Wireless/Networking Cards
- Hot Swap
- USB Protection
- Smartphone and PDA
- Set-top-box
