BTS442E2E3062ABUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS442E2 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 17A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 350 µs |
| Output Peak Current Limit-Nom | 70A |
| Rds On (Typ) | 15m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 4.5mm |
| Length | 9.9mm |
| Width | 9.2mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
BTS442E2E3062ABUMA1 Overview
Tape & Reel (TR) is how it's packaged.The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package includes it.The lighting driver has the mounting type Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.A lighting driver with Auto Restart, Status Flag features is available.The BTS442E2 family consists of this type.It consists of 4 terminations in total.As far as the lighting driver is concerned, there are 1 functions.This lighting driver is capable of delivering a maximum output of 17A volts.A supply voltage of 12V leads to high efficiency.The LED driving board is equipped with a total of 3 pins.Electrical components such as this are included in the Automotive, PROFET? series.The maximum supply voltage is set to 42V.For normal operation, the supply voltage (Vsup) must be kept above 4.5V.
BTS442E2E3062ABUMA1 Features
Supplied from 12V
BTS442E2E3062ABUMA1 Applications
There are a lot of Infineon Technologies BTS442E2E3062ABUMA1 Power Switches ICs applications.
- Hot Swaps
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Wearable Devices
- Notebook and Tablet Computers
- Wireless/Networking Cards
- Notebook PC
- Hot-Swap Systems
- USB Protection
- Gaming
