BTS452RXT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | miniPROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Max Power Dissipation | 41.6W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 52V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 1.8A |
| Nominal Supply Current | 800μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~52V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 200 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 2.5mm |
| Length | 6.5mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS452RXT Overview
Tape & Reel (TR) is the way it's packaged.The TO-252-5, DPak (4 Leads + Tab), TO-252AD package contains it.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.It has a total of 4 terminations.The LED driver has 1 functions.From the lighting driver, there is a maximum output of 1.8AV.Supply voltages of 12V allow for high efficiency.It is mounted in the way of Surface Mount.It is included in the miniPROFET? series.A maximum supply voltage of 52V is set in Vsup.Normal operation requires a voltage above 6V for the supply voltage.
BTS452RXT Features
Supplied from 12V
BTS452RXT Applications
There are a lot of Infineon Technologies BTS452RXT Power Switches ICs applications.
- Handheld Devices
- Set-Top Boxes
- Portable GPS Device
- Wireless Headsets
- Hot Swap
- Notebook PC
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Solid State Drivers
- Mobile Communication Devices
