BTS452TATMA1
| Parameters | |
|---|---|
| Published | 2001 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS452 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 52V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 1.8A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~52V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 200 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.5mm |
| Length | 6.5mm |
| Width | 6.22mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
BTS452TATMA1 Overview
It is packaged in the form of a Tape & Reel (TR).It's included in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the family BTS452.A total of 4 terminations can be found in it.It consists of 1 functions.From the lighting driver, there is a maximum output of 1.8AV.With a supply voltage of 12V, high efficiency is possible.A total of 4 pins are included in this LED driver.Electrical components such as this are included in the miniPROFET? series.The LED driver is configured with a maximum supply voltage of 52V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 6V.
BTS452TATMA1 Features
Supplied from 12V
BTS452TATMA1 Applications
There are a lot of Infineon Technologies BTS452TATMA1 Power Switches ICs applications.
- PC Card Hot Swap
- Portable Devices
- HDD and SSD
- Hot-Swap Systems
- Various applications equipped with buttons
- Handheld Devices
- Set-top-box
- Hard Disk Drives
- USB Power Distribution
- Portable Music Players
