BTS4880RAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 8 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS4880 |
| Pin Count | 36 |
| JESD-30 Code | R-PDSO-G36 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 45V |
| Supply Voltage-Min (Vsup) | 11V |
| Interface | On/Off |
| Current - Output (Max) | 625mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 11V~45V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 100 µs |
| Output Peak Current Limit-Nom | 1.4A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 150 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | ROHS3 Compliant |
BTS4880RAUMA1 Overview
Tape & Reel (TR) is how it's packaged.The 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package contains it.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -25°C~125°C TJ.It is possible to use 8 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.Features of the lighting driver are Auto Restart, Status Flag.I believe it belongs to the BTS4880 family.A total of 36 terminations have been found in it.It contains 8 functions.In terms of output, the lighting driver can provide a maximum of 625mA V.It is possible to obtain high efficiency with a supply voltage of 15V.A total of 36 pins are included in this LED driver.Electrical components such as this are included in the miniPROFET? series.The maximum supply voltage is set to 45V.Normal operation requires Vsup above 11V.
BTS4880RAUMA1 Features
Supplied from 15V
BTS4880RAUMA1 Applications
There are a lot of Infineon Technologies BTS4880RAUMA1 Power Switches ICs applications.
- Solid-State Drives
- Hot-Swap Systems
- Portable Devices
- PC Card Hot Swap
- PDAs
- Wireless Modem Data Cards
- HDD and SSD
- Wireless Headsets
- USB Power Distribution
- Mobile Communication Devices
